ENPRO Professional ventilation solutions

Roof fan RFVN 500 E4 30 - Centrifugal roof fan with backward curved impeller and vertical discharge - Engine out of air flow - Maximum air flow: up to 8,215 m3/h - For continuous operation with temperatures up to 120 °C - Air outlet with protective grille - The fan unit simply rotates for cleaning a...

Air extraction fan BOX-C 225 D2 T40 - Suitable for extracting oily air from kitchens - Engine out of air flow - Maximum air flow: up to 2,010 m3/h - For continuous operation with temperatures up to 120 °C - Backward curved radial impeller - Double-walled housing made of galvanized sheet steel, lined...

Frequency regulator FR-400V-2.2A-0.75kW - Frequency regulator for fan speed control with three-phase motors - Power supply 400V -Nominal current 2.2A -Nominal power 0.75kW - Simple installation, connection and commissioning - Intuitive keyboard for setting operating parameters - Setup simplif...

Variable fan speed regulator REO-230V-1.5A - Rheostat for controlling the fan speed with single-phase motors -Power supply 230V -Nominal power 1.5A - Intended for fans that can be voltage controlled - Potentiometer for fan speed adjustment - The fan speed is regulated by changing the motor vol...

The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air and bypass (BY pass) water. The high efficiency of the plate heat exchanger with linear discharge is up to 81%. The recuperator has a Defrost mode. The possibility...

The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air. The high efficiency of the plate heat exchanger with linear discharge is up to 75%. The recuperator has a Defrost mode. The possibility of binding to BMS. Manufact...

Spiral folded ENPRO SC pipe Made of high quality galvanized sheet DX51D + Z275 for cold forming. In accordance with MEST EN 1506 and MEST EN 12237 standards.

Segmental spiro elbow ENPRO SK-90° Made of high-quality cold-formed galvanized sheet DX51D + Z275. In accordance with MEST EN 1506 and MEST EN 12237 standards.

Circular silencer ENPRO PB-50 It reduces the noise generated in the circular duct system of ventilation. The material for sound absorption is non-flammable mineral glass wool with a thickness of 50 mm, covered with a glass veil. Outer casing made of high-quality cold-formed galvanized sheet DX51D +...

-Ventilation grid VR1 for inlet or outlet air from the room, with one row of adjustable slats -Individually adjustable slats make it possible directing air flow along the vertical axis -Specially designed locks allow hidden mounting - The grille is made of anodized extruded aluminum painted in one o...

- Line diffuser LD 25 for bringing cooled or heated air into the room, 2 slots, diffuser length 1500mm -It is mounted on the ceiling or wall -It is made of anodized aluminum in RAL 9010 (white color). -Integrated plastic regulator (deflector) that directs the air flow (left-right, horizontal-vertica...

Vortex ceiling diffuser VPD-A For supplying or extracting air into the room. Designed for low and medium pressure ventilation systems. The design of the front panel allows the air to swirl and mix with the existing air. The front panel is made of high-quality galvanized sheet, plasticized in RAL 90...

Profile ENPRO MPE20-5 For rectangular ventilation ducts. Made of high quality galvanized sheet DX51D, thickness 0.7mm. Profile length 5m. Bunt 500m. Profile weight 0.49 kg/m. The weight of the box is 245 kg. It is used to connect rectangular ventilation ducts, while at the same time ensuring except...

Corner ENPRO COR 20 Entirely made of high quality galvanized steel. Intended for ENPRO MPE 20 profiles. It achieves the highest level of flange stability by firmly adhering to the profile. It is characterized by a precise geometry that enables an ideal fit on the profile. The fins on the arms of th...

Plate insulation K-FLEX ST is ideal for applications in the insulation of ventilation ducts, tanks and pipes of large diameters. High performance for all applications in the temperature range from -165°C to +85°C. Significantly reduces the risk of condensation and improves energy savings. Fire react...

HORECA HMD-300 highly efficient electrostatic channel device for filtering grease from commercial kitchen hoods. - Air flow up to 3000 m3/h. -Dimensions of the device (WxDxH): 550x690x650mm -Dimensions of the channel connection (Horizontal x Vertical): 450x510 mm -Weight of the device: 60 kg -P...