The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air, and bypass (BY pass) water. The high efficiency of the plate heat exchanger with linear discharge is up to 81%. The recuperator has a Defrost mode. The possibility of binding to BMS. Manufacturer: ENPRO Type: EHR-S 500 Air flow (L/M/H): 400/500/500 m3/h External effort (L/M/H): 110/130/140 Pa Efficiency [%]: 81/76/76 Sound pressure level (min/med/max): 29 / 35 / 39 dB(A) Dimensions (length x height x width): 824x270x904 mm Weight: 36 kg El. Power (W): 200 Current strength [A]: 0.96 Electrical connection (V/Hz/f): 220÷240/50/1
EHR-S 500
1 001,95€
Prices are without VATProduct code | 9115792 | ||||||||
Unit of measure | pcs | ||||||||
Maximal air flow (m3/h) | 750 | ||||||||
Maximum external pressure (Pa) | 305 | ||||||||
Maximum heat recovery efficiency [%] | 81 | ||||||||
Length (mm) | 824 | ||||||||
Width (mm) | 904 | ||||||||
Height (mm) | 270 | ||||||||
Maximum input power (W) | 200 | ||||||||
Current consumption [A] | 0.96 | ||||||||
Air flow [m3/h] |
|
||||||||
External pressure [Pa] |
|
||||||||
Enthalpy efficiency SUMMER [%] |
|
||||||||
Heat recovery efficiency [%] |
|
||||||||
Sound pressure level [dB(A)] |
|
||||||||
Input power [W] |
|
||||||||
Power supply | 230V 1~ | ||||||||
Fan type | AC, 3 speeds | ||||||||
BMS | Yes | ||||||||
By-pass | Yes | ||||||||
Defrost | Yes | ||||||||
Power cable (mm2) | 2x1,5mm2 | ||||||||
Communication cable (mm2) | 2x0,5mm2 | ||||||||
Weight | 36kg |
Related products

EKD-O-200-2
The electric channel air heater EKD is used to reheat the air after passing through the heat recuperator, for the purpose of compensating for ventilation heat losses. It is made of high-quality cold-rolled galvanized sheet steel DX51D. It is supplied with ready-made connections for connection to the...

EKP-O-200-1
The electric channel air preheater EKP is used for preheating the air of the heat recuperator and has the function of protecting the exchanger from the negative influence of low air temperatures (below -15ᵒC). It can be controlled from the ENRPO recuperator controller, providing full integration wit...

EHR TOUCH-SCREEN
EHR Touch-Screen advanced controller with the following options: -Temperature display -Speed setting - Weekly schedule - By-pass -External On/Off -Managing the heater - Thawing -CO2 control -Filter alarm -Work error alarm - Memory with data - Night mode - BMS integration - Air humidity control -Mo...

Wi-Fi modul
The Wi-Fi module enables device management via a smart application and connection of the heat recuperator with external modules for air quality control in the room.

IAQ monitoring modul
The Wi-Fi IAQ monitoring module detects indoor air quality, including the following parameters: '-CO2 concentration in the air -PM 2.5 particles -TVOC parameters (volatile organic compounds) It is connected to the controller of the recuperator, which works according to the parameters measured by the...

HUM monitoring modul
Air humidity sensor for ENPRO EHR heat recuperators
Similar products

EHR-S 250
The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air and bypass (BY pass) water. The high efficiency of the plate heat exchanger with linear discharge is up to 81%. The recuperator has a Defrost mode. The possibility...

EHR-S 1000
The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air and bypass (BY pass) water. The high efficiency of the plate heat exchanger with linear discharge is up to 81%. The recuperator has a Defrost mode. The possibility...

EHR-M 2000
The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air. The high efficiency of the plate heat exchanger with linear discharge is up to 75%. The recuperator has a Defrost mode. The possibility of binding to BMS. Manufact...

EHR-M 3000
The compact ventilation chamber is equipped with a sensible and latent heat recuperator, fans and paper filters for waste and fresh air. The high efficiency of the plate heat exchanger with linear discharge is up to 75%. The recuperator has a Defrost mode. The possibility of binding to BMS. Manufact...